Payment & Shipping Terms:
|Name:||Car Pedal Replacement||Color:||Polish|
|Place Of Origin:||China||Term Of Trade:||E X W(Guangzhou)|
Auto Accessorize Pedals Aluminum Pedal Plate W 166 X 164 X 166 /251 ML 320 ML 350
First loosen the screw, but do not remove the back nut, install the pedal liner in the appropriate position of the far pedal.All the brackets are turned inside, tighten the screws in the diagonal order. The foot steps on the pad, making sure that the installed parts are not loose.It is important to note that you can only operate when the car is stationary and completely flameout.
Hidden trouble processing
In case of a new car, you have a problem with the gas pedal.You don't panic, according to the professional proposed (in fact, only this one is probably the most reasonable solution), hard on the brake pedal, the car stopped after flameout, contact.
Material:High Quality Light Weight Polished Aluminum
Improve overall driving experience.
Heavy duty brushed aluminum construction with non-slip studs on the pedal surface preventing from slipping-off.
Easy to install. Professional assistance is recommended.
|Name:Car Pedal Replacement||Material:Aluminum|
|Color:Polish||Place of Origin:China|
|Brand:JR||Term of Trade:E X W(Guangzhou)|
This is a Replacement Part for your Foot pedal ,it can enhance the performing and make it brilliant as well as they used to.
This pedals with Logo ,if you want to see the pictures with logo pls contact seller feel free.
M-Class W164 W166 2006-2013, ML300/ML350/ML450/ML500/ML550/ML63 AMG, with Automatic transmission models.
GL-Class X164 X166 2006-2013, GL350/GL450/GL500/GL550, with Automatic transmission models.
R-Class W251 2006-2013, R300/R350/R500/R63 AMG with Automatic transmission models.
X164 GL-Class GL320CDI Bluetec Diesel, GL350, GL450, & GL550 with Automatic transmission models.
X166 GL-Class GL320CDI Bluetec Diesel, GL350, GL450, & GL550 with Automatic transmission models.
Pls check below car model list.
The correct manipulation
The throttle of a car engine is usually controlled by the pedal, also known as the accelerator pedal, which is a device that controls the oil supply.
The throttle pedal should be operated with the right heel on the cab floor as a fulcrum, the foot on the accelerator pedal, with the stretch of the ankle, step down or relax.When stepping on the gas pedal, it should be gentle and easy to lift.
When starting the engine, the gas pedal should not step on the bottom, slightly higher than the idle accelerator is good.At the beginning, the fuel should be a little bit before the clutch linkage point.Loosen the clutch to work closely with the accelerator, the movement is quick.
In operation, the throttle should be enlarged or reduced according to the road conditions and actual needs.The selection should be appropriate to enable the engine to run most of the time at the medium speed and the larger throttle valve to save fuel.Add empty oil, clutch and pedal to coordinate when changing gear.
When the car is uphill, must not step dead gas pedal, with low speed gear, the gas pedal should take the next half to be appropriate.When the car runs up the slope, the accelerator pedal must not be pedaling to the end.If the accelerator pedal takes down three quarters of the car and the engine still cannot increase the speed, it should be replaced with a lower level and then push the accelerator pedal to accelerate.
Before the car stops, the gas pedal should be loosened and the gas pedal should not be slammed.
Main point: gently tread softly, straight acceleration, gentle, not urgent, tiptoe, not to shake.
High quality and Durable
If you need buy other products,use the "add to car" button becasuse with your purchase of several commodities,combined postage discount will save you much expense.