Payment & Shipping Terms:
|Name:||Radiator Cap||Color:||As The Picture|
|Brand:||JR||Term Of Trade:||EXW(Guangzhou)|
|Place Of China:||Guangzhou ,China||Include:||1 Piece|
Racing Car Radiator Cap JR-CHEZHIBAO Automotive Parts
Step 1 - start
First, make sure your engine is cold.The high temperature engine shows the high pressure of high pressure in the tank - and may burn you when you open the cap.Cold water can also damage the high heat engine.
Step 2 - clean the water tank
Water tank and accessories
Open and secure the hood to avoid accidental slip.Then, use your resistance brush and soapy water to remove the dead insects and debris collected on the tank grille.Be sure to scrub in the direction of the radiator, not reverse, because the metal is fragile and easy to bend.Once the grille has been cleaned, a gentle flow of water is guided from the top of the grille to confirm that all the debris has been cleared completely.
Although you only flush your water tank once every two years, it is a good idea to clean the tank grid every 12,000 miles.
Step 3 - check the cap
The cap of the water tank is used as the lid of the tank, and the coolant inside the pressurized water tank keeps the engine cool.The coolant pressure depends on the engine and the pressure rating is on the top of the lid itself.
A water tank cover consists of a coil of coil that stretches between the top and the bottom of the metal.The tension between the spring and the sealing rubber is the key to keep the lid under pressure, so if it can be easily compressed, the tank cover should be worn and should be replaced.Another phenomenon of replacing the cover of the tank is any corrosion or drying of the sealing rubber.Generally speaking, water tank cover should be changed at least every two years. Therefore, when flushing water tank, you can use it as part of routine business.Please remember that different tank caps have different pressure ratings, so keep the ratings in your vehicle records.
The water tank is mainly composed of radiator core, water pipe, cooling air blade, upper water tank and lower water tank.Water tank in the radiator, the pipes will be connected to the tank of water tanks and radiator below, hot water by go up and downstream to the lower tank into warm water, cooling air blade channel, by suction fan and the relative wind speed when driving the car forward, make a lot of cold air through the air hole, cooling water will flow through the pipe of heat absorption, divergence in the atmosphere again
|Name :JR Radiator Cap||Brand:JR|
|MOQ:5 Piece||Place Of Origin:China|
1.It is not only to prevent water leakage in the water tank, but the larger role is to adjust the pressure balance of the water tank to maintain the water level balance of the water tank.
2.Change the d1-spec temperature safe water tank cover, which can let you know the accurate water tank temperature without engine. Silica gel material inner plug - increases heat resistance temperature and increases the closeness of the lid of the water tank.
Extremely High Quality aluminum Radiator cap.Its design is very sporty and has been received a good.
There is three model at the picture,when you make an order,please leave message to us,what bar you need?if there is no message under the order,we will send any model what in stock
1.Positive Feedback is very important to us.if you are satisfied with our service, please remeber to give a positive feedback.
2.Please contact us before leaving neutral or negative feedback,we will try our best to solve the problems.
3.If you are not satisfied with our best to solve the problems,please contanct us before leaving your feedback and we will resolve the issue immediately.thank you very much.
High quality and Durable
IF YOU HAVE ANY QUESTION ,PLEASE CONTACT WITH US:
Tel: 13763398810(Mary Lee)